Voltage Inverter electronic circuit diagram

This simple circuit is a good solution to the powering a dual supply op amp from a single battery problem. The circuit simply takes a positive voltage and inverts it. It uses only one 555 timer and a few other passive components, so it doesn't add much in the way of size and cost to a project.

Parts

R1 24K 1/4 Watt Resistor
R2 56K 1/4 Watt Resistor
C1 3300pF 25V Ceramic Capacitor
C2 47uF 25V Electrolytic Capacitor
C3 10uF 25V Electrolytic Capacitor
D1, D2 1N4148 Silicon Diode
U1 555 Timer
MISC Wire, Board

Notes

1. V+ can be anywhere from 4 to 16V. -V is one volt less than V+. So for -12V output, use +13V input. The maximum current output of the circuit is about 280mA, more than enough for a few op amps.
2. For better regulation, a 79LOxx series regulator can be used.
3. A zener diode may also be used to regualte the output voltage.

Source: Electronics Lab

if you liked this page, please consider sharing it. Thank you!